 |
Page 1 of 1
|
Author |
Message |
MaureenT
Newbie - Two Blades
Joined: 30 Oct 2007
Posts: 31
|
 Permission denied error going to Step Two
Several days ago, my host moved my site to a new server. I discovered today that, in the process, the permissions on every single file and directory got changed to 750. Needless to say, I am not a happy camper. Fortunately, the files still exist on the old server, so I was able to go through, compare the two, and change all the file permissions on the new server back to what they used to be. The problem is that it didn't fix the issue that led to me discovering this in the first place.
When I attempt to go to Step Two in the checkout process, I get the following error:
Error Occured: Can't bind:Permission denied
Now, though I painstakingly went through every directory and changed permissions back to their former settings, it's possible that I missed something, but I don't know what.
Do you have some idea on what's causing this? Everything worked fine before the site was moved.
I have AgoraCart 5 (still the free version till I have time to upgrade)
http://www.thayersgraphic.com/reflections/store/agora.cgi?
|
Mon Nov 19, 07 10:19 pm |
|
 |
MaureenT
Newbie - Two Blades
Joined: 30 Oct 2007
Posts: 31
|
I just discovered something new that might change where this thread should have been put. If I do not select a shipping method, I don't get the error, and it goes on to Step Two. I get the error regardless of what shipping method I select, whether it's UPS or USPS.
This brings up another rather alarming problem. I'm not sure if it would be considered a gateway issue, a shopping cart issue, or a shipping issue. I'll go ahead and post it here. If you want me to start a new thread or put in in another forum, let me know.
If I do not select a shipping method, the gateway still goes on to Step Two, allowing the person to check out. The problem is that this means that no shipping cost is added to the total, meaning that they'll get free shipping. Shouldn't an error message come up if they don't select a shipping method?
http://www.thayersgraphic.com/reflections/store/agora.cgi?
|
Mon Nov 19, 07 11:38 pm |
|
 |
scottcrew
Moderator
Joined: 13 Feb 2004
Posts: 7516
Location: The West Side of MI USA
|
Who is the web host?
What do you the following set at:
"How do you wish to connect to UPS (non-XML) / USPS XML?"
Try toggling the setting and see what happens.
Also, this was working before the host moved you, right? Then, you will still need to hound them about what is different about the server's setup. Keep hounding them, escalate the issue...
If worse comes to worse, you may need to consider a new web host, especially if they won't work with you.
_________________ God Bless!
Bonnie - AgoraCart Moderator
Get a Gold Membership
|
Tue Nov 20, 07 6:05 am |
 |
 |
MaureenT
Newbie - Two Blades
Joined: 30 Oct 2007
Posts: 31
|
The host is iPower.com, and, yes, it was working before the move. They did say that if someone had trouble after the move, they'd do all they could to resolve it. I guess we're going to find out. Interestingly, though iPower did offer AgoraCart as one of their eCommerce solutions, I noticed that they don't anymore.
I have it set at http-lib. I just tried LWP, but, though it does go through to Step Two with that setting, the shipping isn't calculated.
Are there any specific Perl modules that need to be present for this cart to work? I did notice a lot of LWP modules in the list of those that are installed. It's Perl 5.8.8, by the way.
|
Tue Nov 20, 07 10:35 am |
|
 |
scottcrew
Moderator
Joined: 13 Feb 2004
Posts: 7516
Location: The West Side of MI USA
|
Keep on iPower... they are notorious for blaming others for the problems on their servers...
They kept blaming other things for 22 days when I gave them a try... When I switched to another
web host, I had my site up and running in less than a day with everything working the way it should...
The server requirements for AgoraCart v5:
* Unix, FreeBSD, OpenBSD or a Linux based hosting account (or server).
* Perl 5.6.x or higher. (most servers will satisfy this requirement)
* This Perl Module must be installed on your server for Version 5.0.x: LWP::Simple (most servers will have this installed)
* This Perl Module must be installed for Pro Version of the cart (Version 5.1.x): LWP::UserAgent (most servers will have this installed)
* FTP or online file manager access with the ability to set permissions on files.
* Run cgi scripts under your own user ID (most servers offer this now) AND/OR the ability to install the wrappers (yourself by SSH2 or by your server admin at your request).
HTH!
_________________ God Bless!
Bonnie - AgoraCart Moderator
Get a Gold Membership
|
Tue Nov 20, 07 11:35 am |
 |
 |
MaureenT
Newbie - Two Blades
Joined: 30 Oct 2007
Posts: 31
|
Here's an update on this problem, which is still not fixed. I learned that my host moved my site to an entirely new OS, going from a FreeBSD to a Debian Linux platform. They never bothered to mention that fact in all their info about the transition. In the move, the permissions on every single file and folder got changed to 750. I had to go through and change them all back to what they were supposed to be. That didn't fix the problem. Just to see what would happen, I did a fresh install of a second cart to see if it would work. The same problem exists, which means that this is not a case of something getting screwed up in the move. There is something about the way they have things set up now that interferes with the shipping API.
I've had four conversations with them, and they keep saying that my case has been given top priority and people are working on it, but, apparently, they haven't figured out how to fix it. They have not tried to claim that the problem is with someone else. They know that the problem is on their end. Yesterday, I gave them through Thursday to have one of the four techs they say is working on my problem to call me and give me an update or I'd be demanding a refund and switching to another host. I don't hold out much hope that I'll be getting a call.
The problem is that I don't know what host to switch to and not have the same (or another) problem. I know that this isn't what you're here for, but do you have any suggestions? Right now, I'm looking mainly at HostMonster and IX Web Hosting. HostMonster includes AgoraCart in their eCommerce features, so I know it will work with them. I like IX Web Hosting because I can get two free domain name registrations for only $6.95 per mo as opposed to one domain name for $4.95 with HostMonster. However, there's the question of whether or not I'll have the same or some other problem with IX Web Hosting. They use CentOS 5 on their Linux hosting. Both of these hosts rate high on several of the Hosting company review sites I've visited. HostMonster is at the top of two of them, IX Web Hosting at the top of one.
Any advice you or someone else might have would be greatly appreciated.
|
Wed Dec 05, 07 1:09 pm |
|
 |
scottcrew
Moderator
Joined: 13 Feb 2004
Posts: 7516
Location: The West Side of MI USA
|
There are some good web hosts listed at:
http://resources.scottcrew.com/host.htm
HTH!
_________________ God Bless!
Bonnie - AgoraCart Moderator
Get a Gold Membership
|
Wed Dec 05, 07 2:17 pm |
 |
 |
MaureenT
Newbie - Two Blades
Joined: 30 Oct 2007
Posts: 31
|
 Now, not showing shipping charge separately
Well, apparently, some time after my last call, iPower fixed the problem, but didn't bother contacting me to let me know. I found out this morning when I called them to tell them I was switching to another host. I have no idea what they did to fix the issue since it appears that only my real store works. The test store I installed still has the same problem. I'm not happy with how they dealt with this issue, so I still intent to move to another host soon, if I can get a prorated refund from iPower. I prepaid for two years.
Unfortunately, there's still a problem. Now, for some reason, though it goes through to Step Two and does have the S&H charge in the grand total, it's not showing the S&H charge separately. It just shows the Item Cost Subtotal line and the Grand Total line, not the Shipping amount line, like it used to.
Any idea why that's happening? I can't think of any changes I made to files that would result in this, but I could be wrong. I'm using AgoraCart 5.0.
http://www.thayersgraphic.com/reflections/store/agora.cgi?
|
Mon Dec 10, 07 4:40 pm |
|
 |
scottcrew
Moderator
Joined: 13 Feb 2004
Posts: 7516
Location: The West Side of MI USA
|
Ahhh, typical iPower behavior....
The shipping, taxes, etc. labels......
Thats a setting in the "Store Design-Misc Settings" manager that deals with the Order Table labels...
HTH!
_________________ God Bless!
Bonnie - AgoraCart Moderator
Get a Gold Membership
|
Mon Dec 10, 07 4:47 pm |
 |
 |
MaureenT
Newbie - Two Blades
Joined: 30 Oct 2007
Posts: 31
|
Yes, I know. I have "Shipping:" as the shipping label, but it's not showing up on totals the page.
|
Mon Dec 10, 07 4:54 pm |
|
 |
scottcrew
Moderator
Joined: 13 Feb 2004
Posts: 7516
Location: The West Side of MI USA
|
There are 2 questions in that same area that you need to answer "YES" to....
_________________ God Bless!
Bonnie - AgoraCart Moderator
Get a Gold Membership
|
Mon Dec 10, 07 4:55 pm |
 |
 |
MaureenT
Newbie - Two Blades
Joined: 30 Oct 2007
Posts: 31
|
Okay, now that is just plain weird. I did have that first question set to yes. I'm certain of it, and I didn't change it to no. Yet, I just looked, and it somehow got set to no [insert Twilight Zone music].
Thanks for pointing out the obvious.
|
Mon Dec 10, 07 5:02 pm |
|
 |
MaureenT
Newbie - Two Blades
Joined: 30 Oct 2007
Posts: 31
|
Well, I see what the problem is. "Display Shipping Label/Costs at View Cart and Checkout?" keeps resetting to "No" after I hit the Submit button, so I have to remember to change it to "Yes" every time I change the settings on that page.
|
Mon Dec 10, 07 5:08 pm |
|
 |
scottcrew
Moderator
Joined: 13 Feb 2004
Posts: 7516
Location: The West Side of MI USA
|
strange.... try just refreshing the page after you hit the submit button...
_________________ God Bless!
Bonnie - AgoraCart Moderator
Get a Gold Membership
|
Mon Dec 10, 07 5:24 pm |
 |
 |
MaureenT
Newbie - Two Blades
Joined: 30 Oct 2007
Posts: 31
|
I did a refresh. It still shows it set at no. I changed it to yes again, hit submit, back it goes to no. The shipping charge is coming up on the totals page now, so it is actually set properly. It's just that the form on that page keeps resetting the answer to that one question to no.
|
Mon Dec 10, 07 5:35 pm |
|
 |
scottcrew
Moderator
Joined: 13 Feb 2004
Posts: 7516
Location: The West Side of MI USA
|
Must be an iPower server thing....
_________________ God Bless!
Bonnie - AgoraCart Moderator
Get a Gold Membership
|
Mon Dec 10, 07 5:43 pm |
 |
 |
|
The time now is Sat Apr 26, 25 9:18 am | All times are GMT - 7 Hours
|
Page 1 of 1
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|